Plat ASTM A-516 Gr.70

Product: Pressure Vessels and Boilers Plate

Kategori: High Tensile Steel Plate
Grades : A-516 Gr.70Standard: ASTM/ ASME
Place of Origin: Indonesia
ASTM A285| ASME SA285 | ASTM A537 | ASME SA537 | EN 10028 | BS 1501 | DIN 17155 | Cryogenic Steel
ASTM A-516 standard is primarily used in welded pressure vessels where improved notch toughness is required. The steel plates allow four different strength levels 55, 60, 65 & 70 and the most common is grade 70. This grade is made to a fine grain particle size to meet the requirement of varied industry applications. ASTM A-516 Gr.70 steel plates are HIC tested.
Uniform surface
High tensile strength
Corrosion resistance
Sturdy construction
Temperature resistance
Thickness: 8 – 65 mm
Size: 1524 x 6096 mm or 5 x 20ft
1829 x 6096 mm or 6 x 20ft

Product	Thickness (Inch)	Size (Feet)	Weight (Kg)
Plat A516 5mm	3/16″	5′ x 20′	347
Plat A516 6mm	1/4″	5′ x 20′	463
Plat A516 8mm	5/16″	5′ x 20′	579
Plat A516  10mm	3/8″	5′ x 20′	694
Plat A516 12 mm	1/2″	5′ x 20′	926
Plat A516 14 mm	9/16″	5′ x 20′	1042
Plat A516 16mm	5/8″	5′ x 20′	1158
Plat A516 19 mm	3/4″	5′ x 20′	1389
Plat A516 25 mm	1″	5′ x 20′	1852
Plat A516 38 mm	1.5″	5′ x 20′	2824
Plat A516 45 mm	1.75″	6′ x 20′	4012
Plat A516 50 mm	2″	6′ x 20′	4458
Plat A516 60 mm	2.375″	6′ x 20′	5351
Plat A516 65 mm	2.625″	6′ x 20′	5695

Thickness above 65mm indent 6 – 8 weeks with minimum order

C	Si	Mn	P	S	Al	Cr
0.10-0.22	0.6	1.0-1.7	0.03	0.03	0.02	0.3
Cu	Ni	Mo	Nb	Ti	V
0.3	0.3	0.08	0.01	0.03	0.02

Tensile strength (MPa) : 485-620
Yield strength (MPa) : 260
Elongation in 200mm (min)(%): 17
Elongation in 50mm (min) (%): 21
Thickness (max)(mm) : 205
ASTM A-516/SA516 normalized products can be welded using a low-hydrogen electrode and Shielded Metal Arc Welding (SMAW), Gas Metal Arc Welding (GMAW) or Submerged Arc Welding (SAW) processes. It is recommended that welding be conducted in accordance with the aplicable ASME/AWS codes.
Because the normalizing process results in a homogenous, fine-grained ferritic microstructure, plates produced by this process exhibit excellent formability.

Equivalents

Characteristic

G.A.M. Service provide high tensile carbon steel plate according to ASTM A516 Grade 70 and ASME SA516 Grade 70 for boiler and pressure vessel fabrication of the oil, gas and petrochemical industry.

Features:

Availability

Tabel Ukuran & Berat  Plat ASTM A-516 Gr.70

For plates < 40mm (thinner), normally supply as rolled. Plates supplied > 40mm (above) thick are normalised.

Chemical Composition (%)

Mechanical Properties

Weldability

Formability

G.A.M. STEEL SERVICE Jln. Afrika No. 2-3 Kawasan Industri Krakatau Cilegon – Banten 42443 Phone : +62858 8050 7859 E- mail : sales.gamsteel@gmail.com